non mercedes Alloy wheels inexpensive and good looking

3 replies [Last post]
Fri, 06/02/2004 - 12:48
300ge
300ge's picture
Offline
Joined: 22.12.2003

Just want to share,

Alutec is offering a rim that has been designed for the Mercedes Sprinter. It comes with a 5*130mm hole pattern , has 6,5 inch width, 16 inch dia and a offset of 60mm. Normally the 463 has 6x16, ET63. I have installed it and it works fine. No interfearance at all! No modifications needed.

I have put a 235/85/16 MT on it and I have no rubbing of the tire under any circiumstances.

The best for last, the rim cost round about 90 Euro each and came with special screws and center caps.

If you want more information, pls see
http://www.gwagen.de/english%20sites/Sprinterfelgen_eng.htm

Top
Fri, 06/02/2004 - 19:48
#1
mortinson
mortinson's picture
Offline
Joined: 06.11.2003
Location: Madrid, Spain
Vantastic tip

Just a pic for everybody to see:

(They look vantastic in your G)

Thanks for the tip, Klaus

Top
Thu, 02/12/2004 - 11:46
#2
G 350 in Tallinn
G 350 in Tallinn's picture
Offline
Joined: 19.10.2004
Location: was Tallinn, Estonia.
not available any longer

Unfortunately, according to my alloy wheel importer, this great value wheel is no longer being manufactured. :(

Top
Thu, 02/12/2004 - 17:08
#3
300ge
300ge's picture
Offline
Joined: 22.12.2003
Re: not available any longer

G 350 in Tallinn wrote:
Unfortunately, according to my alloy wheel importer, this great value wheel is no longer being manufactured. :(

That is true, but there is an alternative...

go to Harald website
http://www.rubicon-trail.com/G-Class/wheels/start.html

you'll see :

not too expensive. They are looking really ridgit, but are in 15inch size. I am sure you'll find similar for 16 inch.

Top