Door Handles

5 replies [Last post]
Roma
Roma's picture
Offline
Joined: 05.06.2012
Location: Norway

Hi all,
Just bought an w463  350 TDI from 1994 and got some problem with the door handle om the right side. It seems that I need to replace it. I have been looking om ebay and found this one:

http://www.ebay.de/itm/Tuergriff-passend-fuer-Mercedes-G-Class-W460-W461-W463-T1-re-o-li?item=120903366882&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3DLVI%26ps%3D63%26clkid%3D186022321316736301

Can you please tell me if it fits to my car? or maybe give me advise where I can buy one?

Thanks
Roma  

Steve Kirk
Steve Kirk's picture
Offline
Joined: 28.03.2005
Location: East yorks
GWOA Groups: Members
Re: Door Handles

Hi Roma
i bought a full set of three for my swb 460 from these people , they fitted fine  , cannot say they will fit a 463 but for the price its got to be worth a try.

http://www.ebay.co.uk/itm/MERCEDES-609-709-811-814D-814-LORRY-TRUCK-G-WA...

Steve

Roma
Roma's picture
Offline
Joined: 05.06.2012
Location: Norway
Re: Door Handles

Hi Steve Kirk,
Mine are slightly differnt in shape, but I will send them an email.

Thanks for advice!

regards
Roma

Pistonhead
Pistonhead's picture
Offline
Joined: 17.12.2006
Location: Loughborough
GWOA Groups: Committee, Members
Re: Door Handles

Hello Roma,

Generally speaking, the G-Wagen door handle are quite good and rarely require replacement.  They do suffer from the adjusting screw on the striker becoming loose and after some re-adjustment become good.

The second weakness is rust corrosion of the door handles mounting.  You have not mentioned why your door handles need replacing, please elaborate of its fault, it could be this could be repaired.

Would you PM, me your chassis number and I can try to verify if, the G350TD handle is the same.  Some handles are different on the latter W463's.

Cheers,

mgrays
mgrays's picture
Offline
Joined: 08.11.2005
Location: Aberdeen Scotland
GWOA Groups: Members
Re: Door Handles

I bought a cheap handle/lock from ebay (they fit sprinter vans etc).. ended up throwing most of it away!

Reason for buying it was that my lock barrel end cover (the stainless steel round plate you put the key through on the end of the button) had been messed with me before I learn how to rebuild them and also the button had corroded. I harvested the button, carried over lock internals and kept the rest original.

They sort of fit.. but are not as well made as MB originals from 1988.

Pistonhead
Pistonhead's picture
Offline
Joined: 17.12.2006
Location: Loughborough
GWOA Groups: Committee, Members
Re: Door Handles

Hello Roma,

I have checked for part numbers of door handles with key barrel and without; the part numbers are the same for a 350GDT and 300GE.  So the ebay part will fit your vehicle.

Cheers,