not enough voltage
unfortunately I have a somewhat an unusual problem. I dont have enough voltage coming to the drivers side tail light.Only about 4-5 volts. the rest of the unit flasher/reverse works fine. So i dont think it is an earth problem. The rest of the car is fine. fuse box is fine. exit from the fuse box for this tail light is about 12-13 volts. i had to do emergency connection from the passengers side tail light, although everything is working now I would like to get to the root of the problem, and repeair it properly.
to check the cable properly i need to remove the petrol tank and may be a lot more. Any ideas/ help will be much appreciated
sounds like a bad earth
good news i have sorted it out. corroded connections in the towbar electrics socket.
I was really happy to find this such a simple thing to fix but caused lots of headscratching. I would suggest all 460 users to check their towbar connectors as well as the sockets under the bonnet. These are the weak points. apply some spray on the connectors change the corroded terminals
JOIN THE GWOA
This website and forum are provided for the benefit of enthusiasts and owners of all Mercedes Benz off road vehicles, in particular the G Wagen. The costs of development, upkeep and provision of the site are met entirely by the annual subscriptions of club members. If you are using the site and are not a member of the G Wagen Owners Association please consider joining. You will have access to areas on the site that are not open to non members, to club trips and meetings and to technical assistance. In addition your contribution (only £25 annually) will help us maintain and develop our website for future users.
Who's new
- Jaffa_JIM_23
- Wrabstar
- GG
- KTMSCANIA22
- 280ge
Reverse and indicator are working fine, and they all share the same earth.
also i took reading from different chassis points, didnot make any difference. still low voltage.