no rear difflock
Sat, 20/01/2007 - 18:46
not looked inside the diff case yet but, all hydraulics are working fine so i removed the slave cylinder and the plunger, the coller that goes over the halfshaft rotates moves in and out about 6mm but no further were do i look now many thanks its a 89 460
Sat, 20/01/2007 - 19:47
#1
Re: no rear difflock
Hi Did you check the travel of the difflock ram ...any air in the system and the stroke is shortened... try putting all back and bleeding the system..if fluid is of unknown age and quality remove all and replenish with Dot 4 hydraulic oil then bleed by having someone pull and push each lever until clear fluid flows rgds