Bonnet grill retaining rivets 88 460
The air intake grill on the bonnet for the fan.. is held on by 6 plastic rivets into 3mm holes.
The grill has been superceeded by 463 which seems to use about 6mm holes so they will not fit old grill/bonnet.. but EPC does not show the old part number for the rivets.. so has anyone know the part number for the 3mm plastic rivets?
Ta..
Somewhere on Hans website he explains how to retrofit the 463 intake grill and washer system to a 460... he should list part numbers. Problem is finding it unless you speak German.
i think it's tipp30:
http://www.hehlhans.de/tipp30.htm
scroll down to point number 5 in light blue, a load of part numbers there.
google.com/translate might be of help
JOIN THE GWOA
This website and forum are provided for the benefit of enthusiasts and owners of all Mercedes Benz off road vehicles, in particular the G Wagen. The costs of development, upkeep and provision of the site are met entirely by the annual subscriptions of club members. If you are using the site and are not a member of the G Wagen Owners Association please consider joining. You will have access to areas on the site that are not open to non members, to club trips and meetings and to technical assistance. In addition your contribution (only £25 annually) will help us maintain and develop our website for future users.
Who's new
- Awon
- f.ecoheat
- ImportBry
- doctorchehab
- Victoria Bond
Thanks for that .. yup that link works .. already have heated washer fluid.
I have the rivets.. will just have to ream out the 4 layers of paint and carefully install them .. when they are pennies I would not bother but when they are unobtainable I will take the care.