steering wheel bolt ???
i am trying to remove the bolt to replace the steering wheel , it looks square like a allen key , been the the local car parts and they have a wide range and sets ... i one what one . does any one know what size it is ???
many thank ste
Are you looking in the hole in the centre of the steering wheel after removing the motif? use a standard 3/8" or1/2" drive socket... I think 22mm to remove the nut.. it turns anti clockwise to remove...lock the steering with the spokes at a quarter to three straight ahead and put the new wheel back on pointing the same direction.. the nut should be torqued to 50nm according to the manual
standard merc is 27....standard rh thread aswell...when you undo the nut give the wheel a good slap from the back with both hands and it will pop right off.
27mm for main steering wheel, unless you have some aftermarket boss,?