460 Inner Wing

8 replies [Last post]
Andy Jones
Andy Jones's picture
Offline
Joined: 04.04.2007
Location: London UK

Anyone know the UK price of the 460 inner wing ?

Andy Jones
Andy Jones's picture
Offline
Joined: 04.04.2007
Location: London UK
Re: 460 Inner Wing

I got the prices from my dealer, for reference they are :-

£343.83, and £374.83.

G500
G500's picture
Offline
Joined: 24.08.2007
Location: Lissewege Close to Zeebrugge Belgium
Re: 460 Inner Wing

Have complete front end of G type 460 for sale here in Belgium.
If interested you can ent E-mail.
g500@fulladsl.be
bstrgds
Dirk

Andy Jones
Andy Jones's picture
Offline
Joined: 04.04.2007
Location: London UK
Re: 460 Inner Wing

Saw your ad, but it's easier to get these problems fixed here. Are you sure your front end has no rust?

mgrays
mgrays's picture
Offline
Joined: 08.11.2005
Location: Aberdeen Scotland
GWOA Groups: Members
Re: 460 Inner Wing

Note you can rebuild them .. on EPC it lists the panels that make up the inner wing. I just redid mine using flat steel before I found them.

Likewise you can buy the parts that make up the outer wing e.g. headlight bowl.

Andy Jones
Andy Jones's picture
Offline
Joined: 04.04.2007
Location: London UK
Re: 460 Inner Wing

Yes, I asked MB about the two pieces at the front, which were the worst problem and one side was on backorder and could take a month to deliver. I had a local welder repair them and he did a great job.

Now I have to refit them and I'm waiting for some MB body sealing tape to arrive, not sure if it's the right stuff until I see it but I'm hoping I've ordered the inch wide rubber strip that goes between the shell and the inner wing. If anyone has p/n's for the body sealing stuff I would be grateful.

mgrays
mgrays's picture
Offline
Joined: 08.11.2005
Location: Aberdeen Scotland
GWOA Groups: Members
Re: 460 Inner Wing

£7.50
A 460 881 03 90
Wing inner/outer strip P section 25x1.3x4mm

Make sure you tell the dealer you need it is 1.2m lengths. Mine gave me a 1m and 2m length when I ordered 3m so I had to complain to get a second 2m length.

Andy Jones
Andy Jones's picture
Offline
Joined: 04.04.2007
Location: London UK
Re: 460 Inner Wing

Thanks for that, it would come in useful but I need the strip that seals the inner wing to the shell. I managed to save the P profile that goes between the inner and outer wing.

The piece I'm looking for doesn't appear on the EPC, my dealer found a sealing tape which is like sponge the right width and compresses to nothing, one side is adhesive. I'll put that on and see how it goes, it will stop vibration or rubbing which I guess is the idea of the rubber strip.

mgrays
mgrays's picture
Offline
Joined: 08.11.2005
Location: Aberdeen Scotland
GWOA Groups: Members
Re: 460 Inner Wing

Ah that bit... I got some generic Rubber strip .. not foam (well maybe closed cell) as you do not want it holding water; I used one of these!;
I think the 8mm Butyl Rubber.

Car Builder Solutions = http://www.nfauto.co.uk/

10m £23.50 TRMRIB1 £2.35/m inv Neoprene 10x4mm ribbed self adhesive

1 £9.99 ADHCON Bonnet foam -Contact adhesive

1 £14.10 BUTYL butyl rubber 8mmx10m roll

1 £2.93 DSTAP Double sided tape 24mm x 5m Bonnet strength strip double sided 40x2.6mm d/s x 1.4m

Also used Kiowa for something I cannot remember now..